BONFIGLIOLI act 401 Manual de usuario descargar pdf (Pagina 44)

110: Simple Sensorless Control

111: Simple Sensorless Control with PI function

115: Simple Sensorless Control with master / slave

control

116: Simple Sensorless Control with

synchronisation control

160: Simple Sensorless Control with Brake Control

and Load Detection

210: Field-oriented control with speed sensor

211: Field-oriented control with speed sensor and

PI function

215: Field-oriented control with speed sensor with

master / slave function

216: Field-oriented control with speed sensor with

electric shaft

230: Field-oriented control with speed sensor with

torque/speed switching

260: Field-oriented control with speed sensor with

Brake Control and Load Detection

410: Sensorless Control with extended tuning

411: Sensorless ﬁeld orientation control with PI

regulator

415: Sensorless ﬁeld orientation control with

electronic gearbox and position control

430: Sensorless Control with extended tuning and

torque / speed control switching

460: Sensorless Control with extended tuning and

with Brake Control and Load Detection

510: Sensorless ﬁeld orientation control of a

synchronous machine

515: Sensorless ﬁeld orientation control of a

synchronous machine with electronic gear and

position control

516: Sensorless ﬁeld orientation control of a

synchronous machine with electronic gear and

index control

530: Sensorless ﬁeld orientation control of a

synchronous machine with torque/speed

switching

560: Sensorless ﬁeld orientation control of a

synchronous machine with electronic gear and

position control

By default the ACT frequency inverter is supplied

with conﬁguration 110.

Conﬁgurations can be changed from the control

unit or PC (VPlus) by means of parameter P030.

Conﬁguration 110 is recommended for low

dynamic applications or for speed control of

several motors in parallel (in the event that the

inverter selection criterion is based on the sum of

the rated currents of the motors to be driven).

Conﬁguration 111 is recommended for driving

turbine machinery (pumps and fans).

Conﬁguration 410 provides high dynamic

performance also at low speed without the use

of a speed sensor. For enhanced performance

the motor data must be entered and the system

must be tuned; in addition, the speed controller

must be set up for the optimisation of dynamic

performance in accordance with the moment of

inertia of the load.

This conﬁguration can also be used for simple

resolvers by implementing the internal function

for positioning from an external reference point

(e.g. proximity switch).

Conﬁguration 460 is particularly suitable for

elevators and lifting drives in general (cranes,

travelling hoists, etc.).

Conﬁguration 210 requires the use of a speed

sensor (push-pull or line driver); this conﬁguration

allows the most precise load control in terms of

speed and torque, including control with nominal

torque at zero rpm (standstill with torque).

Conﬁguration 216 can be utilised for synchronous

tie applications between several motors with

deﬁnition of angular phase differences between

each axis.

Conﬁguration 510 is the standard synchronous

motor operation. This conﬁguration needs a

synchronous motor with Resolver and an ACT

device with EM-RES.

Conﬁguration 515 adds the functionality of

the electronic gear to the conﬁguration 510.

Conﬁguration 516 allows synchronous tied

applications with an index control.

Conﬁguration 560 adds extended brake control

and is suited especially for vertical movements.

Conﬁgurations implementable with the

ACT frequency inverter (parameter P030)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 73 74

Comentarios a estos manuales

Alexey 11 Jun 2024 | 08:57:25

Продается в России?

teophan 27 Jul 2025 | 09:25:51

honjj

BONFIGLIOLI act 401 Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Adaptadores E Inversores De Energía BONFIGLIOLI act 401